Companies applying for membership of the BBSA undergo a vetting procedure before admittance. The requirements and vetting procedure include, a minimum of three years successful trading, bona fide business premises, inspection of the applicant’s premises and satisfactory trade references.  
 
All members of the BBSA must abide by the Association’s Code of Practice.  

You can do so by contacting our members. Go to the Directory Search page where you will find a list. Click on "Product and Location". Select the product of your choice and the type of supplier you are looking for. Select a region, then click on “Start Search”.  
 
The individual companies listed will be able to help you directly.  

There is no doubt that the most effective way to keep a conservatory cool is to prevent the sun’s rays from reaching the glass – this requires an external conservatory awning.  
 
Not all conservatories are suitable for awnings and internal blinds may be the only option. Internal conservatory blinds need to be combined with good ventilation to allow warm air to escape from the conservatory roof.

We advise that you consult the supplier of the blinds for their recommendations.

Yes, but measuring is not always as straightforward as it seems. Even a relatively simple internal blind can measured in different ways and mistakes and misunderstandings have been made.  
 
Conservatory blinds are notoriously difficult to measure and should definitely be left to an expert.

Yes, but assuming the measurements are correct, you have to ensure the fixings are appropriate for the type of material into which they are being fixed. e.g. dry lining, cavity walls, hollow bricks, block etc. What can appear sound may be hiding some surprises.  
 
Awnings and shutters can be particularly difficult. They are heavy and you will require access equipment. The structure of the building at the fixing points needs to be checked to ensure it is sound – this is normally done when the initial survey and measurements are done. Best left to an expert!

Yes. Virtually any type of blind, awning or shutter can be electrically operated. There are many types of control from simple switches to sophisticated control systems. Interior blinds, for example, can be automatically adjusted according to required light levels, whilst external blinds may be operated in conjunction with light sensors and anemometers to reduce the chances of wind damage.

A Local Planning Authority (LPA) may insist on planning permission being obtained for the installation of external blinds or shutters. This will depend on the type of building, the location of the installation (e.g at the front or rear of the building) etc. However, permission will always be required to install a blind or shutter on a listed building or within a conservation area. In all other areas it is the prerogative of the LPA.

Yes, it is possible, but you will need to have spreader plates (also known as bungalow brackets). These spread the load of awning onto several courses of bricks below the awning itself. On a multi-storey building, the weight of the building above provides the structural integrity to support the awning.

Essentially, awnings are designed for sun protection and should not be left out in windy conditions. Gusty conditions, in particular, can cause problems.  
 
Light to medium rain should not be a problem, but it is recommended that the fabric is given a chance to dry out before the awning is retracted.

As a natural material, timber is subject to movement and for timber blinds it is essential to use timbers that are stable when in the form of narrow strips. The timber has to be seasoned to a moisture content of between 6-8% to maintain this stability and minimise warping. Therefore, careful selection and seasoning of timber prior to manufacture will reduce or minimise warping.  
 
However, extreme variations in heat or humidity can cause some movement in the timber.

The Health and Safety (Display Screen Equipment) Regulations 1992, as amended, state that windows must be fitted with a suitable system of adjustable covering to attenuate the daylight that falls on the workstation. The décor of the room and sensible positioning of workstations also play an important part.